# Project State

## Project Reference

See: .paul/PROJECT.md (updated 2026-05-18)

**Core value:** Machinists transfer CNC programs to/from any controller without manual steps or internet
**Current focus:** v0.6 Fagor Support complete; ready for v0.7 planning

## Current Position

Milestone: v0.6 Fagor Support — **Complete**
Phase: 16 of 16 (fagor-ftp) — Complete
Plan: 16-02 complete
Status: Milestone complete — ready for v0.7 planning
Last activity: 2026-05-25 — Phase 16-02 fixup complete (post-review); v0.6 milestone complete

Progress:
- Milestone v0.1: [██████████] 100% (complete)
- Milestone v0.2: [██████████] 100% (complete)
- Milestone v0.3: [██████████] 100% (complete)
- Milestone v0.4: [██████████] 100% (complete)
- Milestone v0.5: [██████████] 100% (complete)
- Milestone v0.6: [██████████] 100% (complete)
- Phase 15: [██████████] 100%
- Phase 16: [██████████] 100%

## Loop Position

```
PLAN ──▶ APPLY ──▶ UNIFY
  ✓        ✓        ✓     [Loop complete — v0.6 milestone complete]
```

## What Was Built (v0.6 Fagor Support — complete)

### Phase 16 — Fagor FTP

- `Cnc/Models/CncManufacturer.cs` — aggiunto `Fagor` all'enum
- `Cnc/Fagor/FagorConnectionConfig.cs` — nuovo, ProgramDirectory `/Users/Prg/`, ProgramExtension `.nc` default
- `Cnc/Fagor/IFagorFtpClient.cs` — nuovo, interfaccia mirror Siemens
- `Cnc/Fagor/FagorFtpClient.cs` — nuovo, FtpWebRequest + ASCII, mirror Siemens 1:1
- `Cnc/Fagor/FagorMachine.cs` — nuovo, implementa `ICncMachine` con `ResolvePath` adattato per `ProgramExtension` configurabile
- `Cnc/CncMachineFactory.cs` — case `Fagor` con porta default 21
- `Cnc/NcProgramValidator.cs` — refactor: helper `IsRestrictiveDialect()` (Fanuc+Mitsubishi); check generic (block 80, no tab, no lowercase, nested parens, comment 32) gated per-produttore. Case `Fagor` aggiunto in `ValidateName` (max 24 char, no `ñ`, solo lettere/cifre/spazi) e `ValidateForbiddenChars` (nessuna restrizione contenuto)
- `ArgParser.cs` — case `"fagor"` aggiunto
- `Program.cs` — help text aggiornato (manufacturer/username/password)
- `NcProgramManager.csproj` — 4 `<Compile Include>` per Cnc\Fagor\*.cs
- `NcProgramManager.Tests/Unit/FagorMachineTests.cs` — nuovo, 12 unit test con `Mock<IFagorFtpClient>` + 2 test con validator reale (`ñ`, lunghezza)
- `NcProgramManager.Tests/Integration/FagorMachineIntegrationTests.cs` — nuovo, 5 stub-based + 1 hardware skip (`FAGOR_TEST_IP`)
- `NcProgramManager.Tests/Unit/NcProgramValidatorTests.cs` — 8 nuovi test Fagor; 3 test esistenti spostati da Siemens a Fanuc dopo refactor gating
- `NcProgramManager.Tests/NcProgramManager.Tests.csproj` — 2 `<Compile Include>` aggiunti
- `README.md` — sezione "Controller Fagor" in italiano: modelli supportati (8060/8065/8070), non supportati (8055 base, 8025-8050), regole nome programma, env var test

Modelli supportati: Fagor 8060, 8065, 8070 (FTP nativo); Fagor 8055 (richiede opzione Ethernet).
Modelli non supportati: 8025/8030/8040/8050 (solo RS232, modulo seriale non implementato).

### Phase 16-02 — Fagor Fixup (post-review)

Fix derivati da code review v0.6:

- `Cnc/NcProgramValidator.cs` — Fagor `ValidateName`: split stem/extension via `LastIndexOf('.')`; whitelist letter/digit/space applicata solo allo stem (consente `.nc` o altre estensioni). Letterali `ñ` sostituiti con escape Unicode `ñ` (codepage safety)
- `NcProgramManager.Tests/Unit/NcProgramValidatorTests.cs`:
  - 3 nuovi test lock Siemens (lowercase/tab/long-block ora esenti)
  - 3 nuovi test lock Heidenhain (lowercase/tab/long-block ora esenti)
  - 4 nuovi test Fagor (`.nc` extension success, `.pim` extension success, stem con simbolo fail, `ñ` escape)
  - 1 test esistente Fagor `ñ` migrato a escape `ñ`
- `NcProgramManager.Tests/Unit/CncMachineFactoryTests.cs` — aggiunto `Create_Fagor_ReturnsFagorMachine`
- `.paul/ISSUES.md` — aggiunte ISS-012..ISS-017 da review findings (non risolti in v0.6, deferiti)

Issue follow-up aperti: ISS-012, ISS-013, ISS-014, ISS-015, ISS-016, ISS-017

## What Was Built (v0.5 Operational Quality — complete)

### Phase 15 — Logging
- `nlog.config` — rolling file target (daily, 7-day archive) + console (`levels="Info"`, `${message}` layout); `throwConfigExceptions=true`
- `packages.config` / `NcProgramManager.csproj` — NLog 5.2.8 reference + Content/CopyAlways entry
- `FanucMachine.cs`, `HeidenhainMachine.cs`, `SiemensMachine.cs`, `MitsubishiMachine.cs` — logger field + SetState catch → `_log.Warn`; Dispose catches annotated
- `Lsv2Client.cs` — logger field + Info at connect/disconnect + cleanup catch annotations
- `Program.cs` — logger field + 3× `_log.Error` in catch blocks + 103× `_log.Info` (all Console.Write/WriteLine replaced); zero Console.Write/WriteLine remain
- ISS-003 closed; ISS-004 closed

## What Was Built (v0.4 Robustness — complete)

### Phase 14 — Test Hardening
- `NcProgramManager.Tests/Integration/HardwareTestHelper.cs` — `GetIpOrSkip(string)` calls `Assert.Ignore` when env var missing; ISS-007 closed
- `HeidenhainMachineIntegrationTests.cs`, `SiemensMachineIntegrationTests.cs`, `MitsubishiMachineIntegrationTests.cs` — `Hardware_ConnectAsync_RealMachine` + `[Category("Hardware")]` added to each
- `NcProgramManager.Tests/Unit/LicenseFileTests.cs` — 4 tests covering empty, whitespace, valid base64, nonexistent path
- `LicenseValidatorTests.cs` — `Validate_EmptyFingerprint_ReturnsFalse` added; ISS-008 scaffold complete

### Phase 13 — Robustness Fixes
- `Licensing/MachineFingerprint.cs` — null guards on both WMI reads (`?.Value?.ToString() ?? string.Empty`); ISS-001 closed
- `Licensing/LicenseValidator.cs` — `SHA256CryptoServiceProvider` in `using` block inside `Validate()`; ISS-005 closed
- `Cnc/Heidenhain/Lsv2Client.cs` — `Connect()` calls `_tcp.Close()` on timeout branch to abort pending socket; ISS-006 closed

## What Was Built (v0.3 Code Quality — complete)

### Phase 11 — Refactor
- `ArgParser.cs` — static class, `Parse(string[]) → InputArgs`; all CLI regex parsing extracted from Program.cs
- `Program.cs` — no static state; `Scarica`/`Invia` take explicit `InputArgs`; `VediErrore` takes `bool debugMode`
- `Program.cs` — try/finally with `connected` flag in `Scarica` and `Invia`; connection leak fixed
- `Program.cs` — `PrintErrors(IReadOnlyList<CncError>)` helper; `CncResult.Errors` printed on every failure
- `AesCrypt.cs` — deleted (dead code, no references)

### Phase 12 — Docs CLI
- `README.md` — params table expanded from 6 → 16 entries (all CLI args documented)
- `README.md` — codici errore section: 12 error codes with causa probabile + soluzione

## What Was Built (v0.1 Multi-CN Release)

### Phase 1 — CNC Abstraction
- Namespace: `Fanuc_integration.Cnc.*` → `FanucProgramManager.Cnc.*` (29 files)
- `IFocasDialect` extended: `UploadStart`/`DownloadStart` accept `short fileType`
- `IFanucMachine` created: extends `ICncMachine` with tool offset + work zero R/W
- `CncManufacturer` enum: Fanuc, Heidenhain, Siemens, Mitsubishi
- All 29 `Cnc/**/*.cs` files added to csproj

### Phase 2 — Heidenhain LSV2
- `HeidenhainConnectionConfig` — IP, port 19000, credentials, timeout
- `Lsv2Client` — TCP framing, CRC-16/CCITT, login (SELECT+LOG_IN), ReceiveFile/SendFile
- `HeidenhainMachine : ICncMachine` — RunGuardedAsync pattern, state machine

### Phase 3 — Siemens + Mitsubishi FTP
- `SiemensConnectionConfig` / `SiemensFtpClient` / `SiemensMachine : ICncMachine`
- `MitsubishiConnectionConfig` / `MitsubishiFtpClient` / `MitsubishiMachine : ICncMachine`

### Phase 4 — Wiring
- `CncMachineFactory` — creates right `ICncMachine` from `InputArgs`
- `InputArgs` — added `manufacturer`, `username`, `password` fields
- `Program.cs` — full rewrite using `ICncMachine`; Fanuc 3-file via `IFanucMachine` cast

### Phase 5 — NC Validator
- `ValidationSeverity` / `ValidationError` / `ValidationResult` model types
- `INcProgramValidator` + `NcProgramValidator` (5 universal + per-manufacturer rules)
- Validator injected into all 4 machine classes; upload blocked on Error severity
- `NcProgramValidatorTests` — 30+ NUnit tests

### Test Infrastructure
- `NcProgramManager.Tests/` — NUnit 3.13.3 + Moq 4.18.4, .NET 4.7.2
- `FtpServerStub` + `Lsv2ServerStub` — in-process TCP stubs
- Unit + integration tests; Fanuc FOCAS tests `[Ignore]`d (Windows-only DLL)

## What Was Built (v0.2 NcProgramManager — complete)

### Phase 06 — Rename Cleanup
- Namespace: `FanucProgramManager.*` → `NcProgramManager.*` (all files)
- Project renamed, test folder renamed, dead `FANUCMachine.cs` deleted

### Phase 07 — License Core
- `IMachineFingerprint` / `ILicenseValidator` interfaces
- `MachineFingerprint` — WMI CPU/BIOS fingerprint
- `LicenseFile.TryRead` — reads `.lic` file, returns base64 signature
- `LicenseValidator.Validate` — RSA-SHA256 verify
- `LicenseValidatorTests` — 6 unit tests (testable via internal ctor injection)

### Phase 08 — License Integration
- `Program.cs` — RSA check wired at startup; `checkLicense` deleted; `license.lic` next to EXE
- `InputArgs.cs` — `-chiave=` field removed

### Phase 09 — License Generator
- `LicenseGenerator` standalone console tool (separate repo: `ssh://git@3nt-git.duckdns.org:222/davide.trentin/license-generator.git`)
- Commands: `keygen` (RSA 2048-bit pair), `fingerprint` (WMI, Windows), `sign` (RSA-SHA256 → .lic)
- Real public key embedded in `Licensing/LicenseValidator.cs` (PLACEHOLDER removed)
- `private.key.xml` at `~/Documents/mine/c#/LicenseGenerator/` (gitignored — keep secure)

### Phase 10 — README Docs
- `README.md` in NcProgramManager root — Italian, operator-facing: CLI args, license setup, examples, controllers table
- `README.md` in LicenseGenerator repo — Italian, vendor-facing: keygen first-run, 4-step license issuance workflow, commands table, security

## CLI Args (current — all 16)
- `-azione=` — action (Scarica/Invia)
- `-manufacturer=fanuc|heidenhain|siemens|mitsubishi` (default: fanuc)
- `-ip=` — CNC IP (Ethernet)
- `-porta=` — port (Ethernet)
- `-tipo=` — connection type: 3=Ethernet, 2=HSSB (Fanuc legacy)
- `-nodo=` — HSSB node (Fanuc only)
- `-username=` (Heidenhain/Siemens/Mitsubishi)
- `-password=` (Heidenhain/Siemens/Mitsubishi)
- `-pathprogramma=` — local file path (required for Invia)
- `-path=` — CNC program path; default 1 = //CNC_MEM/USER/PATH1/
- `-workzero=` — include work zero offset
- `-tooloffset=` — include tool offset
- `-commento=` — program comment
- `-compatibility` — compatibility mode flag
- `-debug=` — keep terminal open after operation
- `-help` — show help and exit
- License: place `license.lic` next to EXE (no CLI arg)

## Accumulated Context

### Decisions
- .NET 4.7.2 locked — max compatibility
- RSA asymmetric offline licensing: private key vendor-only, public key embedded in binary
- `license.lic` always at `AppDomain.CurrentDomain.BaseDirectory` — no CLI override
- `RSACryptoServiceProvider` + `SHA256CryptoServiceProvider` (not HashAlgorithmName) — .NET 4.7.2 compat
- Constructor injection pattern: internal ctor accepts key XML — testable without Windows WMI
- LicenseGenerator: standalone separate repo — vendor tool, never shipped to customers
- Heidenhain: LSV2 port 19000, needs real hardware testing
- Siemens: FTP `/_N_MPF_DIR/`, needs Sinumerik FTP option enabled on machine
- `#` = Warning in Fanuc/Mitsubishi — macro variable indicator
- NLog console target `levels="Info"`, `${message}` layout — all operator output through NLog; Warn/Error file only
- Cleanup catches: comment-only, no log — Dispose must not throw; logging infra can fail

### Deferred Issues
Tracked in `.paul/ISSUES.md` — 11 issues total; 7 closed (ISS-001, ISS-003, ISS-004, ISS-005, ISS-006, ISS-007, ISS-008 partial).

Key open items:
- ISS-002: Blocking .GetAwaiter().GetResult() — Medium, refactor
- ISS-008: Full closure needs real Windows hardware run with env vars set
- ISS-009/010: Heidenhain/Siemens ReadActiveProgram not implemented — deferred
- `private.key.xml` owned by root (external repo) — run `sudo chown $USER ~/Documents/mine/c#/LicenseGenerator/private.key.xml`

### Blockers/Concerns
None — v0.5 complete.

### Git State
Last commit: `60ce1c9` — feat(15-logging): NLog structured logging — all output through NLog (v0.5 complete)
LicenseGenerator repo: commit `2ef68dd` — feat: initial LicenseGenerator
Branch: main

## Codebase Mapped

Date: 2026-05-18
Documents: `.paul/codebase/` (7 files — STACK, ARCHITECTURE, STRUCTURE, CONVENTIONS, TESTING, INTEGRATIONS, CONCERNS)

## Session Continuity

Last session: 2026-05-18
Stopped at: v0.5 milestone complete — Phase 15 both plans done
Next action: /paul:milestone for v0.6
Resume file: .paul/ROADMAP.md

---
*STATE.md — Updated after every significant action*