refactor(rename): FanucProgramManager → NcProgramManager

Phase 06 complete: - Namespace renamed in 62 .cs files (namespace + using directives) - AssemblyName + RootNamespace updated in csproj files - FanucProgramManager.csproj → NcProgramManager.csproj - FanucProgramManager.sln → NcProgramManager.sln - FanucProgramManager.Tests/ → NcProgramManager.Tests/ - FANUCMachine.cs deleted (dead code, zero references) Fanuc-prefixed class names kept (FanucMachine, FanucProgram, IFanucMachine) — manufacturer identifiers, not project names. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-17 22:31:36 +02:00 · 2026-05-17 22:31:36 +02:00 · a5d73db69a
commit a5d73db69a
parent 9bb65c4748
68 changed files with 487 additions and 1238 deletions
--- a/.paul/PROJECT.md
+++ b/.paul/PROJECT.md
@ -1,4 +1,4 @@
-# FanucProgramManager
+# NcProgramManager

 ## What This Is

@ -34,6 +34,7 @@ Machinists and operators transfer CNC programs to/from any controller without ma
 - [x] Multi-CN support — Fanuc, Heidenhain, Siemens, Mitsubishi — Phase 1–4
 - [x] 3-file management mode (Fanuc) via IFanucMachine — Phase 4
 - [x] NC program validation before upload (all 4 manufacturers) — Phase 5
+- [x] Project renamed FanucProgramManager → NcProgramManager — Phase 6

 ### Planned (Next)
 - [ ] Hardware fingerprint license system (CPU ID + disk serial + encrypted file)
@ -96,4 +97,4 @@ Machinists and operators transfer CNC programs to/from any controller without ma

 ---
 *PROJECT.md — Updated when requirements or context change*
-*Last updated: 2026-05-17 after Phase 5 (NC Validator)*
+*Last updated: 2026-05-17 after Phase 6 (Rename Cleanup)*
--- a/.paul/ROADMAP.md
+++ b/.paul/ROADMAP.md
@ -84,14 +84,33 @@ Completed: 2026-05-13

 ## Next Milestone

-**v0.2 License System** (proposed)
-Status: Not started
+**v0.2 NcProgramManager** (in progress)
+Status: Planning
+Phases: 0 of 4 complete

-Planned scope:
- Hardware fingerprint (CPU ID + disk serial)
- Encrypted license file (AES, offline)
- License generator tool (internal)
- Replace hardcoded key/IV
+| Phase | Name | Plans | Status |
+|-------|------|-------|--------|
+| 06 | rename-cleanup | 1 | ✅ Complete |
+| 07 | license-core | 1 | Not started |
+| 08 | license-integration | 1 | Not started |
+| 09 | license-generator | 1 | Not started |
+
+### Phase 06: rename-cleanup ✅
+**Goal:** Rename FanucProgramManager → NcProgramManager (namespace, project files, test folder). Delete dead FANUCMachine.cs.
+**Completed:** 2026-05-17
+**Plans:** [x] 06-01: Namespace + file rename
+
+### Phase 07: license-core (proposed)
+**Goal:** `IMachineFingerprint`, `ILicenseValidator`, RSA signature verification, `.lic` file model
+**Depends on:** Phase 06
+
+### Phase 08: license-integration (proposed)
+**Goal:** Wire license system into Program.cs, replace `checkLicense`, replace `-chiave=` with `-licfile=`
+**Depends on:** Phase 07
+
+### Phase 09: license-generator (proposed)
+**Goal:** Separate generator console app — reads machine fingerprint, signs, writes `.lic` file
+**Depends on:** Phase 07

 ---
 *Roadmap updated: 2026-05-17 — v0.1 milestone complete*
--- a/.paul/STATE.md
+++ b/.paul/STATE.md
@ -9,21 +9,23 @@ See: .paul/PROJECT.md (updated 2026-05-17)

 ## Current Position

-Milestone: v0.1 Multi-CN Release — **COMPLETE**
-Phase: 5 of 5 — Complete
-Plan: All plans unified
-Status: Milestone complete, ready for v0.2 planning
-Last activity: 2026-05-17 — Phase 5 unified, milestone closed
+Milestone: v0.2 NcProgramManager
+Phase: 1 of 4 (06-rename-cleanup) — Complete
+Plan: 06-01 unified
+Status: Phase 06 complete, ready to plan Phase 07
+Last activity: 2026-05-17 — Phase 06 rename-cleanup unified

 Progress:
- Milestone v0.1: [██████████] 100%
+- Milestone v0.1: [██████████] 100% (complete)
+- Milestone v0.2: [██░░░░░░░░] 25%
+- Phase 06: [██████████] 100%

 ## Loop Position

 Current loop state:
 ```
 PLAN ──▶ APPLY ──▶ UNIFY
-  ✓        ✓        ✓     [Loop complete — milestone done]
+  ✓        ✓        ✓     [Loop complete — ready for next PLAN]
 ```

 ## What Was Built (v0.1 Multi-CN Release)
@ -87,9 +89,9 @@ None — code complete, pending hardware testing on real machines.
 ## Session Continuity

 Last session: 2026-05-17
-Stopped at: v0.1 milestone UNIFY complete
-Next action: `/paul:plan` for v0.2 License System, or `/paul:milestone` to define next milestone
-Resume file: .paul/ROADMAP.md
+Stopped at: Phase 06 complete — rename-cleanup unified
+Next action: /paul:plan for Phase 07 (license-core)
+Resume file: .paul/phases/06-rename-cleanup/06-01-SUMMARY.md

 ---
 *STATE.md — Updated after every significant action*
--- a/.paul/phases/06-rename-cleanup/06-01-PLAN.md
+++ b/.paul/phases/06-rename-cleanup/06-01-PLAN.md
@ -0,0 +1,220 @@
+---
+phase: 06-rename-cleanup
+plan: 01
+type: execute
+wave: 1
+depends_on: []
+files_modified:
+  - "**/*.cs (all ~62 files — namespace string replace)"
+  - Properties/AssemblyInfo.cs
+  - FanucProgramManager.csproj → NcProgramManager.csproj
+  - FanucProgramManager.sln → NcProgramManager.sln
+  - FanucProgramManager.Tests/FanucProgramManager.Tests.csproj → NcProgramManager.Tests/NcProgramManager.Tests.csproj
+  - FANUCMachine.cs (delete)
+autonomous: true
+---
+
+<objective>
+## Goal
+Rename project from FanucProgramManager to NcProgramManager: namespace, assembly, project files, test folder, and delete dead legacy file.
+
+## Purpose
+Product is no longer Fanuc-only. Name FanucProgramManager is wrong. NcProgramManager reflects multi-CN scope.
+
+## Output
+- All namespaces: `FanucProgramManager` → `NcProgramManager`
+- Project/solution files renamed
+- Test folder renamed
+- `FANUCMachine.cs` deleted (zero references outside itself)
+- Solution builds with no errors
+</objective>
+
+<context>
+## Project Context
+@.paul/PROJECT.md
+@.paul/STATE.md
+
+## Key Files
+@FanucProgramManager.csproj
+@FanucProgramManager.sln
+@Properties/AssemblyInfo.cs
+@FanucProgramManager.Tests/FanucProgramManager.Tests.csproj
+</context>
+
+<acceptance_criteria>
+
+## AC-1: Namespace renamed everywhere
+```gherkin
+Given any .cs file in the project
+When opened
+Then namespace declarations and using directives reference NcProgramManager (not FanucProgramManager)
+```
+
+## AC-2: Project and solution files updated
+```gherkin
+Given the renamed solution
+When opened in Visual Studio or built with msbuild
+Then assembly name is NcProgramManager, test assembly is NcProgramManager.Tests, project reference resolves
+```
+
+## AC-3: Dead code removed
+```gherkin
+Given FANUCMachine.cs
+When cleanup completes
+Then file does not exist (confirmed zero references before deletion)
+```
+
+</acceptance_criteria>
+
+<tasks>
+
+<task type="auto">
+  <name>Task 1: Replace FanucProgramManager string in all .cs files</name>
+  <files>All *.cs files under project root (recursively)</files>
+  <action>
+    Run find+sed to replace all occurrences of `FanucProgramManager` with `NcProgramManager` in every .cs file:
+
+    ```bash
+    find /path/to/project -name "*.cs" -exec sed -i 's/FanucProgramManager/NcProgramManager/g' {} +
+    ```
+
+    This covers:
+    - `namespace FanucProgramManager` → `namespace NcProgramManager`
+    - `namespace FanucProgramManager.Cnc` → `namespace NcProgramManager.Cnc`
+    - `using FanucProgramManager;` → `using NcProgramManager;`
+    - `using FanucProgramManager.Cnc.Fanuc;` → `using NcProgramManager.Cnc.Fanuc;`
+    - All sub-namespaces (.Cnc, .Cnc.Fanuc, .Cnc.Heidenhain, .Cnc.Siemens, .Cnc.Mitsubishi, .Cnc.Models)
+    - `InternalsVisibleTo("FanucProgramManager.Tests")` in AssemblyInfo.cs
+    - `AssemblyTitle`, `AssemblyProduct` in AssemblyInfo.cs
+
+    Avoid: editing binary files, NuGet package cache, obj/bin folders.
+    Use: `-not -path "*/obj/*" -not -path "*/bin/*" -not -path "*/.paul/*"`
+  </action>
+  <verify>
+    ```bash
+    grep -r "FanucProgramManager" --include="*.cs" .
+    ```
+    Must return zero results.
+  </verify>
+  <done>AC-1 satisfied: no .cs file contains FanucProgramManager</done>
+</task>
+
+<task type="auto">
+  <name>Task 2: Update project and solution metadata files</name>
+  <files>
+    FanucProgramManager.csproj,
+    FanucProgramManager.Tests/FanucProgramManager.Tests.csproj,
+    FanucProgramManager.sln
+  </files>
+  <action>
+    In `FanucProgramManager.csproj`:
+    - `<RootNamespace>FanucProgramManager</RootNamespace>` → `<RootNamespace>NcProgramManager</RootNamespace>`
+    - `<AssemblyName>FanucProgramManager</AssemblyName>` → `<AssemblyName>NcProgramManager</AssemblyName>`
+
+    In `FanucProgramManager.Tests/FanucProgramManager.Tests.csproj`:
+    - `<RootNamespace>FanucProgramManager.Tests</RootNamespace>` → `<RootNamespace>NcProgramManager.Tests</RootNamespace>`
+    - `<AssemblyName>FanucProgramManager.Tests</AssemblyName>` → `<AssemblyName>NcProgramManager.Tests</AssemblyName>`
+    - `<ProjectReference Include="..\FanucProgramManager.csproj">` → `<ProjectReference Include="..\NcProgramManager.csproj">`
+    - `<Name>FanucProgramManager</Name>` → `<Name>NcProgramManager</Name>`
+
+    In `FanucProgramManager.sln`:
+    - Project line: `"FanucProgramManager", "FanucProgramManager.csproj"` → `"NcProgramManager", "NcProgramManager.csproj"`
+    - Project line: `"FanucProgramManager.Tests", "FanucProgramManager.Tests\FanucProgramManager.Tests.csproj"` → `"NcProgramManager.Tests", "NcProgramManager.Tests\NcProgramManager.Tests.csproj"`
+  </action>
+  <verify>
+    ```bash
+    grep -n "FanucProgramManager" FanucProgramManager.csproj FanucProgramManager.Tests/FanucProgramManager.Tests.csproj FanucProgramManager.sln
+    ```
+    Must return zero results.
+  </verify>
+  <done>AC-2 satisfied: all project metadata references NcProgramManager</done>
+</task>
+
+<task type="auto">
+  <name>Task 3: Rename files/folder and delete dead code</name>
+  <files>
+    FANUCMachine.cs (delete),
+    FanucProgramManager.csproj → NcProgramManager.csproj (rename),
+    FanucProgramManager.sln → NcProgramManager.sln (rename),
+    FanucProgramManager.Tests/ → NcProgramManager.Tests/ (folder rename),
+    FanucProgramManager.Tests/FanucProgramManager.Tests.csproj → NcProgramManager.Tests/NcProgramManager.Tests.csproj (rename)
+  </files>
+  <action>
+    1. Delete `FANUCMachine.cs` — confirmed dead: no file outside itself references `FANUCMachine`. Also remove its `<Compile Include="FANUCMachine.cs" />` entry from csproj.
+
+    2. Rename project file:
+       ```bash
+       mv FanucProgramManager.csproj NcProgramManager.csproj
+       ```
+
+    3. Rename solution file:
+       ```bash
+       mv FanucProgramManager.sln NcProgramManager.sln
+       ```
+
+    4. Rename test folder (this moves all contents):
+       ```bash
+       mv FanucProgramManager.Tests NcProgramManager.Tests
+       ```
+
+    5. Rename test csproj inside the now-renamed folder:
+       ```bash
+       mv NcProgramManager.Tests/FanucProgramManager.Tests.csproj NcProgramManager.Tests/NcProgramManager.Tests.csproj
+       ```
+
+    Order matters: rename folder BEFORE renaming csproj inside it.
+    The .sln file was already updated in Task 2 to reference new paths — verify paths match after rename.
+
+    Avoid: renaming `Cnc/Fanuc/` folder or any Fanuc-prefixed class files — `FanucMachine`, `FanucConnectionConfig` etc. are manufacturer-specific names, keep them.
+  </action>
+  <verify>
+    ```bash
+    ls NcProgramManager.csproj NcProgramManager.sln NcProgramManager.Tests/NcProgramManager.Tests.csproj
+    ls FANUCMachine.cs 2>&1   # must say: No such file
+    grep "FANUCMachine" NcProgramManager.csproj  # must return nothing
+    ```
+  </verify>
+  <done>AC-2 and AC-3 satisfied: files renamed, dead code deleted, .sln paths match physical files</done>
+</task>
+
+</tasks>
+
+<boundaries>
+
+## DO NOT CHANGE
+- `Cnc/Fanuc/` folder name — Fanuc is a manufacturer name, not a project name
+- `FanucMachine.cs`, `FanucConnectionConfig.cs`, `FanucCapabilities.cs` — manufacturer-specific class names, keep
+- `FanucProgram.cs` — Fanuc ISO program format class, name is accurate
+- `FanucProgramParsingTests.cs` — test file for FanucProgram, name is accurate
+- `IFanucMachine.cs` — interface name correct (Fanuc-specific capability set)
+- Any class name that describes Fanuc-specific behavior
+
+## SCOPE LIMITS
+- No Italian → English rename in this plan (deferred)
+- No logic changes — pure rename/delete only
+- No NuGet package changes
+- No new files created
+
+</boundaries>
+
+<verification>
+Before declaring plan complete:
+- [ ] `grep -r "FanucProgramManager" --include="*.cs" .` returns zero results
+- [ ] `grep -r "FanucProgramManager" --include="*.csproj" .` returns zero results
+- [ ] `grep "FanucProgramManager" NcProgramManager.sln` returns zero results
+- [ ] `ls FANUCMachine.cs` returns "No such file"
+- [ ] `ls NcProgramManager.csproj NcProgramManager.sln NcProgramManager.Tests/` all exist
+- [ ] All acceptance criteria met
+</verification>
+
+<success_criteria>
+- All tasks completed
+- All verification checks pass
+- No FanucProgramManager references remain in .cs, .csproj, or .sln files
+- FANUCMachine.cs deleted
+- Project file names match NcProgramManager
+</success_criteria>
+
+<output>
+After completion, create `.paul/phases/06-rename-cleanup/06-01-SUMMARY.md`
+</output>
--- a/.paul/phases/06-rename-cleanup/06-01-SUMMARY.md
+++ b/.paul/phases/06-rename-cleanup/06-01-SUMMARY.md
@ -0,0 +1,102 @@
+---
+phase: 06-rename-cleanup
+plan: 01
+subsystem: infra
+tags: [rename, namespace, csharp, dotnet472, cleanup]
+
+requires: []
+provides:
+  - NcProgramManager namespace across all 62 .cs files
+  - NcProgramManager.csproj / NcProgramManager.sln / NcProgramManager.Tests/
+  - FANUCMachine.cs deleted
+affects: [07-license-core, 08-license-integration, 09-license-generator]
+
+tech-stack:
+  added: []
+  patterns: []
+
+key-files:
+  created: []
+  modified:
+    - NcProgramManager.csproj (was FanucProgramManager.csproj)
+    - NcProgramManager.sln (was FanucProgramManager.sln)
+    - NcProgramManager.Tests/NcProgramManager.Tests.csproj
+    - All 62 .cs files (namespace string replace)
+
+key-decisions:
+  - "Fanuc-prefixed class names kept: FanucMachine, FanucProgram, IFanucMachine — manufacturer names, not project names"
+
+patterns-established: []
+
+duration: 5min
+started: 2026-05-17T00:00:00Z
+completed: 2026-05-17T00:00:00Z
+---
+
+# Phase 6 Plan 1: Rename Cleanup Summary
+
+**FanucProgramManager → NcProgramManager across 62 .cs files, 3 project/solution files, test folder rename, FANUCMachine.cs deleted.**
+
+## Performance
+
+| Metric | Value |
+|--------|-------|
+| Duration | ~5 min |
+| Started | 2026-05-17 |
+| Completed | 2026-05-17 |
+| Tasks | 3 completed |
+| Files modified | 62 .cs + 3 project files + 1 folder rename + 1 file deleted |
+
+## Acceptance Criteria Results
+
+| Criterion | Status | Notes |
+|-----------|--------|-------|
+| AC-1: Namespace renamed everywhere | Pass | grep returns zero results across all .cs files |
+| AC-2: Project/solution files updated | Pass | AssemblyName, RootNamespace, ProjectReference all updated; files renamed |
+| AC-3: Dead code removed | Pass | FANUCMachine.cs deleted; Compile entry removed from csproj |
+
+## Accomplishments
+
+- All namespaces, using directives, AssemblyTitle, AssemblyProduct, InternalsVisibleTo updated in one sed pass
+- Project and test folder physically renamed to match new name
+- Zero FanucProgramManager strings remain in .cs, .csproj, or .sln
+
+## Files Created/Modified
+
+| File | Change | Purpose |
+|------|--------|---------|
+| All 62 `.cs` files | Modified | `FanucProgramManager` → `NcProgramManager` namespace/usings |
+| `NcProgramManager.csproj` | Renamed + modified | AssemblyName + RootNamespace updated |
+| `NcProgramManager.sln` | Renamed + modified | Project references updated |
+| `NcProgramManager.Tests/NcProgramManager.Tests.csproj` | Renamed + modified | AssemblyName, RootNamespace, ProjectReference updated |
+| `FANUCMachine.cs` | Deleted | Dead code — zero references outside itself |
+
+## Decisions Made
+
+| Decision | Rationale | Impact |
+|----------|-----------|--------|
+| Keep `FanucMachine`, `FanucProgram`, `IFanucMachine` names | These are manufacturer-specific identifiers, not project names | Future phases reference these names unchanged |
+
+## Deviations from Plan
+
+None — plan executed exactly as written.
+
+## Issues Encountered
+
+None.
+
+## Next Phase Readiness
+
+**Ready:**
+- All code under `NcProgramManager` namespace
+- Project builds under new name (pending Windows build verification)
+- Clean foundation for license system phases
+
+**Concerns:**
+- Build not verifiable on Linux (fwlib32 Windows-only DLL) — same as before
+
+**Blockers:** None
+
+---
+*Phase: 06-rename-cleanup, Plan: 01*
+*Completed: 2026-05-17*
--- a/AesCrypt.cs
+++ b/AesCrypt.cs
@ -2,7 +2,7 @@
 using System.IO;
 using System.Security.Cryptography;

-namespace FanucProgramManager
+namespace NcProgramManager
 {
        class AesCrypt
        {
--- a/Cnc/CncMachineFactory.cs
+++ b/Cnc/CncMachineFactory.cs
@ -1,11 +1,11 @@
 using System;
-using FanucProgramManager.Cnc.Fanuc;
-using FanucProgramManager.Cnc.Heidenhain;
-using FanucProgramManager.Cnc.Mitsubishi;
-using FanucProgramManager.Cnc.Models;
-using FanucProgramManager.Cnc.Siemens;
+using NcProgramManager.Cnc.Fanuc;
+using NcProgramManager.Cnc.Heidenhain;
+using NcProgramManager.Cnc.Mitsubishi;
+using NcProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Siemens;

-namespace FanucProgramManager.Cnc
+namespace NcProgramManager.Cnc
 {
    internal static class CncMachineFactory
    {
--- a/Cnc/Fanuc/FanucCapabilities.cs
+++ b/Cnc/Fanuc/FanucCapabilities.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    public sealed class FanucCapabilities
    {
--- a/Cnc/Fanuc/FanucConnectionConfig.cs
+++ b/Cnc/Fanuc/FanucConnectionConfig.cs
@ -1,6 +1,6 @@
 using System;

-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    public enum FanucTransport
    {
--- a/Cnc/Fanuc/FanucDialect.cs
+++ b/Cnc/Fanuc/FanucDialect.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    public enum FanucDialect
    {
--- a/Cnc/Fanuc/FanucDialectDetector.cs
+++ b/Cnc/Fanuc/FanucDialectDetector.cs
@ -1,6 +1,6 @@
-using FanucProgramManager;
+using NcProgramManager;

-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    internal static class FanucDialectDetector
    {
--- a/Cnc/Fanuc/FanucErrorTranslator.cs
+++ b/Cnc/Fanuc/FanucErrorTranslator.cs
@ -1,8 +1,8 @@
 using System.Collections.Generic;
-using FanucProgramManager;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    internal static class FanucErrorTranslator
    {
--- a/Cnc/Fanuc/FanucMachine.cs
+++ b/Cnc/Fanuc/FanucMachine.cs
@ -5,11 +5,11 @@ using System.Linq;
 using System.Text;
 using System.Threading;
 using System.Threading.Tasks;
-using FanucProgramManager;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    public sealed class FanucMachine : IFanucMachine
    {
--- a/Cnc/Fanuc/FocasDialectFactory.cs
+++ b/Cnc/Fanuc/FocasDialectFactory.cs
@ -1,6 +1,6 @@
 using System;

-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    internal static class FocasDialectFactory
    {
--- a/Cnc/Fanuc/IFocasDialect.cs
+++ b/Cnc/Fanuc/IFocasDialect.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    internal interface IFocasDialect
    {
--- a/Cnc/Fanuc/IsoProgramFormatter.cs
+++ b/Cnc/Fanuc/IsoProgramFormatter.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    public static class IsoProgramFormatter
    {
--- a/Cnc/Fanuc/LegacyFocasDialect.cs
+++ b/Cnc/Fanuc/LegacyFocasDialect.cs
@ -1,6 +1,6 @@
-using FanucProgramManager;
+using NcProgramManager;

-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    internal sealed class LegacyFocasDialect : IFocasDialect
    {
--- a/Cnc/Fanuc/ModernFocasDialect.cs
+++ b/Cnc/Fanuc/ModernFocasDialect.cs
@ -1,7 +1,7 @@
 using System.Text;
-using FanucProgramManager;
+using NcProgramManager;

-namespace FanucProgramManager.Cnc.Fanuc
+namespace NcProgramManager.Cnc.Fanuc
 {
    internal sealed class ModernFocasDialect : IFocasDialect
    {
--- a/Cnc/Heidenhain/HeidenhainConnectionConfig.cs
+++ b/Cnc/Heidenhain/HeidenhainConnectionConfig.cs
@ -1,6 +1,6 @@
 using System;

-namespace FanucProgramManager.Cnc.Heidenhain
+namespace NcProgramManager.Cnc.Heidenhain
 {
    public sealed class HeidenhainConnectionConfig
    {
--- a/Cnc/Heidenhain/HeidenhainMachine.cs
+++ b/Cnc/Heidenhain/HeidenhainMachine.cs
@ -3,10 +3,10 @@ using System.Collections.Generic;
 using System.Linq;
 using System.Threading;
 using System.Threading.Tasks;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc.Heidenhain
+namespace NcProgramManager.Cnc.Heidenhain
 {
    public sealed class HeidenhainMachine : ICncMachine
    {
--- a/Cnc/Heidenhain/ILsv2Client.cs
+++ b/Cnc/Heidenhain/ILsv2Client.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Heidenhain
+namespace NcProgramManager.Cnc.Heidenhain
 {
    internal interface ILsv2Client
    {
--- a/Cnc/Heidenhain/Lsv2Client.cs
+++ b/Cnc/Heidenhain/Lsv2Client.cs
@ -2,7 +2,7 @@ using System;
 using System.Net.Sockets;
 using System.Text;

-namespace FanucProgramManager.Cnc.Heidenhain
+namespace NcProgramManager.Cnc.Heidenhain
 {
    /// <summary>LSV2 protocol client for Heidenhain TNC controls.</summary>
    internal sealed class Lsv2Client : ILsv2Client, IDisposable
--- a/Cnc/ICncMachine.cs
+++ b/Cnc/ICncMachine.cs
@ -1,9 +1,9 @@
 using System;
 using System.Threading;
 using System.Threading.Tasks;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc
+namespace NcProgramManager.Cnc
 {
    public interface ICncMachine : IDisposable
    {
--- a/Cnc/IFanucMachine.cs
+++ b/Cnc/IFanucMachine.cs
@ -1,8 +1,8 @@
 using System.Threading;
 using System.Threading.Tasks;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc
+namespace NcProgramManager.Cnc
 {
    /// <summary>Fanuc-specific extensions: tool offset and work zero offset transfer.</summary>
    public interface IFanucMachine : ICncMachine
--- a/Cnc/INcProgramValidator.cs
+++ b/Cnc/INcProgramValidator.cs
@ -1,6 +1,6 @@
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc
+namespace NcProgramManager.Cnc
 {
    /// <summary>Validates NC program content before upload to a CNC controller.</summary>
    public interface INcProgramValidator
--- a/Cnc/Mitsubishi/IMitsubishiFtpClient.cs
+++ b/Cnc/Mitsubishi/IMitsubishiFtpClient.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Mitsubishi
+namespace NcProgramManager.Cnc.Mitsubishi
 {
    internal interface IMitsubishiFtpClient
    {
--- a/Cnc/Mitsubishi/MitsubishiConnectionConfig.cs
+++ b/Cnc/Mitsubishi/MitsubishiConnectionConfig.cs
@ -1,6 +1,6 @@
 using System;

-namespace FanucProgramManager.Cnc.Mitsubishi
+namespace NcProgramManager.Cnc.Mitsubishi
 {
    public sealed class MitsubishiConnectionConfig
    {
--- a/Cnc/Mitsubishi/MitsubishiFtpClient.cs
+++ b/Cnc/Mitsubishi/MitsubishiFtpClient.cs
@ -3,7 +3,7 @@ using System.IO;
 using System.Net;
 using System.Text;

-namespace FanucProgramManager.Cnc.Mitsubishi
+namespace NcProgramManager.Cnc.Mitsubishi
 {
    /// <summary>FTP client for Mitsubishi M-series CNC program transfer.</summary>
    internal sealed class MitsubishiFtpClient : IMitsubishiFtpClient
--- a/Cnc/Mitsubishi/MitsubishiMachine.cs
+++ b/Cnc/Mitsubishi/MitsubishiMachine.cs
@ -3,10 +3,10 @@ using System.Collections.Generic;
 using System.Linq;
 using System.Threading;
 using System.Threading.Tasks;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc.Mitsubishi
+namespace NcProgramManager.Cnc.Mitsubishi
 {
    public sealed class MitsubishiMachine : ICncMachine
    {
--- a/Cnc/Models/CncError.cs
+++ b/Cnc/Models/CncError.cs
@ -1,6 +1,6 @@
 using System;

-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public sealed class CncError
    {
--- a/Cnc/Models/CncManufacturer.cs
+++ b/Cnc/Models/CncManufacturer.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public enum CncManufacturer { Fanuc, Heidenhain, Siemens, Mitsubishi }
 }
--- a/Cnc/Models/CncProgram.cs
+++ b/Cnc/Models/CncProgram.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public sealed class CncProgram
    {
--- a/Cnc/Models/CncResult.cs
+++ b/Cnc/Models/CncResult.cs
@ -1,7 +1,7 @@
 using System;
 using System.Collections.Generic;

-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    /// <summary>Result wrapper for all CNC operations.</summary>
    public sealed class CncResult<T>
--- a/Cnc/Models/ConnectionState.cs
+++ b/Cnc/Models/ConnectionState.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public enum ConnectionState
    {
--- a/Cnc/Models/MachineMode.cs
+++ b/Cnc/Models/MachineMode.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public enum MachineMode
    {
--- a/Cnc/Models/MachineSnapshot.cs
+++ b/Cnc/Models/MachineSnapshot.cs
@ -1,7 +1,7 @@
 using System;
 using System.Collections.Generic;

-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public sealed class MachineSnapshot
    {
--- a/Cnc/Models/MotionState.cs
+++ b/Cnc/Models/MotionState.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public enum MotionState
    {
--- a/Cnc/Models/RunState.cs
+++ b/Cnc/Models/RunState.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public enum RunState
    {
--- a/Cnc/Models/ValidationError.cs
+++ b/Cnc/Models/ValidationError.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public sealed class ValidationError
    {
--- a/Cnc/Models/ValidationResult.cs
+++ b/Cnc/Models/ValidationResult.cs
@ -1,6 +1,6 @@
 using System.Collections.Generic;

-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public sealed class ValidationResult
    {
--- a/Cnc/Models/ValidationSeverity.cs
+++ b/Cnc/Models/ValidationSeverity.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Models
+namespace NcProgramManager.Cnc.Models
 {
    public enum ValidationSeverity { Error, Warning }
 }
--- a/Cnc/NcProgramValidator.cs
+++ b/Cnc/NcProgramValidator.cs
@ -1,9 +1,9 @@
 using System;
 using System.Collections.Generic;
 using System.Text.RegularExpressions;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc
+namespace NcProgramManager.Cnc
 {
    /// <summary>Validates NC program content per-manufacturer before upload.</summary>
    public sealed class NcProgramValidator : INcProgramValidator
--- a/Cnc/Siemens/ISiemensFtpClient.cs
+++ b/Cnc/Siemens/ISiemensFtpClient.cs
@ -1,4 +1,4 @@
-namespace FanucProgramManager.Cnc.Siemens
+namespace NcProgramManager.Cnc.Siemens
 {
    internal interface ISiemensFtpClient
    {
--- a/Cnc/Siemens/SiemensConnectionConfig.cs
+++ b/Cnc/Siemens/SiemensConnectionConfig.cs
@ -1,6 +1,6 @@
 using System;

-namespace FanucProgramManager.Cnc.Siemens
+namespace NcProgramManager.Cnc.Siemens
 {
    public sealed class SiemensConnectionConfig
    {
--- a/Cnc/Siemens/SiemensFtpClient.cs
+++ b/Cnc/Siemens/SiemensFtpClient.cs
@ -3,7 +3,7 @@ using System.IO;
 using System.Net;
 using System.Text;

-namespace FanucProgramManager.Cnc.Siemens
+namespace NcProgramManager.Cnc.Siemens
 {
    /// <summary>FTP client for Siemens Sinumerik CNC program transfer.</summary>
    internal sealed class SiemensFtpClient : ISiemensFtpClient
--- a/Cnc/Siemens/SiemensMachine.cs
+++ b/Cnc/Siemens/SiemensMachine.cs
@ -3,10 +3,10 @@ using System.Collections.Generic;
 using System.Linq;
 using System.Threading;
 using System.Threading.Tasks;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Cnc.Siemens
+namespace NcProgramManager.Cnc.Siemens
 {
    public sealed class SiemensMachine : ICncMachine
    {
--- a/FANUCMachine.cs
+++ b/FANUCMachine.cs
--- a/FanucProgram.cs
+++ b/FanucProgram.cs
@ -1,7 +1,7 @@
 using System;
 using System.Text.RegularExpressions;

-namespace FanucProgramManager
+namespace NcProgramManager
 {
    internal class FanucProgram
    {
--- a/InputArgs.cs
+++ b/InputArgs.cs
@ -1,6 +1,6 @@
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager
+namespace NcProgramManager
 {
    internal class InputArgs
    {
--- a/FanucProgramManager.Tests/Integration/HeidenhainMachineIntegrationTests.cs
+++ b/FanucProgramManager.Tests/Integration/HeidenhainMachineIntegrationTests.cs
@ -1,10 +1,10 @@
 using System;
 using NUnit.Framework;
-using FanucProgramManager.Cnc.Models;
-using FanucProgramManager.Cnc.Heidenhain;
-using FanucProgramManager.Tests.Integration.Stubs;
+using NcProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Heidenhain;
+using NcProgramManager.Tests.Integration.Stubs;

-namespace FanucProgramManager.Tests.Integration
+namespace NcProgramManager.Tests.Integration
 {
    [TestFixture]
    [Category("Integration")]
--- a/FanucProgramManager.Tests/Integration/MitsubishiMachineIntegrationTests.cs
+++ b/FanucProgramManager.Tests/Integration/MitsubishiMachineIntegrationTests.cs
@ -1,10 +1,10 @@
 using System;
 using NUnit.Framework;
-using FanucProgramManager.Cnc.Models;
-using FanucProgramManager.Cnc.Mitsubishi;
-using FanucProgramManager.Tests.Integration.Stubs;
+using NcProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Mitsubishi;
+using NcProgramManager.Tests.Integration.Stubs;

-namespace FanucProgramManager.Tests.Integration
+namespace NcProgramManager.Tests.Integration
 {
    [TestFixture]
    [Category("Integration")]
--- a/FanucProgramManager.Tests/Integration/SiemensMachineIntegrationTests.cs
+++ b/FanucProgramManager.Tests/Integration/SiemensMachineIntegrationTests.cs
@ -1,10 +1,10 @@
 using System;
 using NUnit.Framework;
-using FanucProgramManager.Cnc.Models;
-using FanucProgramManager.Cnc.Siemens;
-using FanucProgramManager.Tests.Integration.Stubs;
+using NcProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Siemens;
+using NcProgramManager.Tests.Integration.Stubs;

-namespace FanucProgramManager.Tests.Integration
+namespace NcProgramManager.Tests.Integration
 {
    [TestFixture]
    [Category("Integration")]
--- a/FanucProgramManager.Tests/Integration/Stubs/FtpServerStub.cs
+++ b/FanucProgramManager.Tests/Integration/Stubs/FtpServerStub.cs
@ -6,7 +6,7 @@ using System.Net.Sockets;
 using System.Text;
 using System.Threading;

-namespace FanucProgramManager.Tests.Integration.Stubs
+namespace NcProgramManager.Tests.Integration.Stubs
 {
    /// <summary>
    /// Minimal in-process FTP server using passive mode.
--- a/FanucProgramManager.Tests/Integration/Stubs/Lsv2ServerStub.cs
+++ b/FanucProgramManager.Tests/Integration/Stubs/Lsv2ServerStub.cs
@ -6,7 +6,7 @@ using System.Net.Sockets;
 using System.Text;
 using System.Threading;

-namespace FanucProgramManager.Tests.Integration.Stubs
+namespace NcProgramManager.Tests.Integration.Stubs
 {
    /// <summary>
    /// Minimal in-process LSV2 server.
--- a/FanucProgramManager.Tests/FanucProgramManager.Tests.csproj
+++ b/FanucProgramManager.Tests/FanucProgramManager.Tests.csproj
@ -7,8 +7,8 @@
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <ProjectGuid>{A1B2C3D4-E5F6-7890-ABCD-EF1234567890}</ProjectGuid>
    <OutputType>Library</OutputType>
-    <RootNamespace>FanucProgramManager.Tests</RootNamespace>
-    <AssemblyName>FanucProgramManager.Tests</AssemblyName>
+    <RootNamespace>NcProgramManager.Tests</RootNamespace>
+    <AssemblyName>NcProgramManager.Tests</AssemblyName>
    <TargetFrameworkVersion>v4.7.2</TargetFrameworkVersion>
    <FileAlignment>512</FileAlignment>
    <Deterministic>true</Deterministic>
@ -46,9 +46,9 @@
    </Reference>
  </ItemGroup>
  <ItemGroup>
-    <ProjectReference Include="..\FanucProgramManager.csproj">
+    <ProjectReference Include="..\NcProgramManager.csproj">
      <Project>{1032188B-3321-42B2-87ED-343BF718CAF5}</Project>
-      <Name>FanucProgramManager</Name>
+      <Name>NcProgramManager</Name>
    </ProjectReference>
  </ItemGroup>
  <ItemGroup>
--- a/FanucProgramManager.Tests/Unit/CncMachineFactoryTests.cs
+++ b/FanucProgramManager.Tests/Unit/CncMachineFactoryTests.cs
@ -1,12 +1,12 @@
 using NUnit.Framework;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Fanuc;
-using FanucProgramManager.Cnc.Heidenhain;
-using FanucProgramManager.Cnc.Mitsubishi;
-using FanucProgramManager.Cnc.Models;
-using FanucProgramManager.Cnc.Siemens;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Fanuc;
+using NcProgramManager.Cnc.Heidenhain;
+using NcProgramManager.Cnc.Mitsubishi;
+using NcProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Siemens;

-namespace FanucProgramManager.Tests.Unit
+namespace NcProgramManager.Tests.Unit
 {
    [TestFixture]
    public class CncMachineFactoryTests
--- a/FanucProgramManager.Tests/Unit/FanucMachineTests.cs
+++ b/FanucProgramManager.Tests/Unit/FanucMachineTests.cs
@ -1,10 +1,10 @@
 using System;
 using NUnit.Framework;
 using Moq;
-using FanucProgramManager.Cnc.Fanuc;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Fanuc;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Tests.Unit
+namespace NcProgramManager.Tests.Unit
 {
    /// <summary>
    /// FanucMachine calls real FOCAS DLL in ConnectCore and most methods guard
--- a/FanucProgramManager.Tests/Unit/FanucProgramParsingTests.cs
+++ b/FanucProgramManager.Tests/Unit/FanucProgramParsingTests.cs
@ -1,7 +1,7 @@
 using NUnit.Framework;
-using FanucProgramManager;
+using NcProgramManager;

-namespace FanucProgramManager.Tests.Unit
+namespace NcProgramManager.Tests.Unit
 {
    [TestFixture]
    public class FanucProgramParsingTests
--- a/FanucProgramManager.Tests/Unit/HeidenhainMachineTests.cs
+++ b/FanucProgramManager.Tests/Unit/HeidenhainMachineTests.cs
@ -1,11 +1,11 @@
 using System;
 using NUnit.Framework;
 using Moq;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
-using FanucProgramManager.Cnc.Heidenhain;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Heidenhain;

-namespace FanucProgramManager.Tests.Unit
+namespace NcProgramManager.Tests.Unit
 {
    [TestFixture]
    public class HeidenhainMachineTests
--- a/FanucProgramManager.Tests/Unit/IsoProgramFormatterTests.cs
+++ b/FanucProgramManager.Tests/Unit/IsoProgramFormatterTests.cs
@ -1,7 +1,7 @@
 using NUnit.Framework;
-using FanucProgramManager.Cnc.Fanuc;
+using NcProgramManager.Cnc.Fanuc;

-namespace FanucProgramManager.Tests.Unit
+namespace NcProgramManager.Tests.Unit
 {
    [TestFixture]
    public class IsoProgramFormatterTests
--- a/FanucProgramManager.Tests/Unit/MitsubishiMachineTests.cs
+++ b/FanucProgramManager.Tests/Unit/MitsubishiMachineTests.cs
@ -1,11 +1,11 @@
 using System;
 using NUnit.Framework;
 using Moq;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
-using FanucProgramManager.Cnc.Mitsubishi;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Mitsubishi;

-namespace FanucProgramManager.Tests.Unit
+namespace NcProgramManager.Tests.Unit
 {
    [TestFixture]
    public class MitsubishiMachineTests
--- a/FanucProgramManager.Tests/Unit/NcProgramValidatorTests.cs
+++ b/FanucProgramManager.Tests/Unit/NcProgramValidatorTests.cs
@ -1,8 +1,8 @@
 using NUnit.Framework;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager.Tests.Unit
+namespace NcProgramManager.Tests.Unit
 {
    [TestFixture]
    public class NcProgramValidatorTests
--- a/FanucProgramManager.Tests/Unit/SiemensMachineTests.cs
+++ b/FanucProgramManager.Tests/Unit/SiemensMachineTests.cs
@ -1,11 +1,11 @@
 using System;
 using NUnit.Framework;
 using Moq;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
-using FanucProgramManager.Cnc.Siemens;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;
+using NcProgramManager.Cnc.Siemens;

-namespace FanucProgramManager.Tests.Unit
+namespace NcProgramManager.Tests.Unit
 {
    [TestFixture]
    public class SiemensMachineTests
--- a/FanucProgramManager.Tests/packages.config
+++ b/FanucProgramManager.Tests/packages.config
--- a/FanucProgramManager.csproj
+++ b/FanucProgramManager.csproj
@ -6,8 +6,8 @@
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <ProjectGuid>{1032188B-3321-42B2-87ED-343BF718CAF5}</ProjectGuid>
    <OutputType>Exe</OutputType>
-    <RootNamespace>FanucProgramManager</RootNamespace>
-    <AssemblyName>FanucProgramManager</AssemblyName>
+    <RootNamespace>NcProgramManager</RootNamespace>
+    <AssemblyName>NcProgramManager</AssemblyName>
    <TargetFrameworkVersion>v4.7.2</TargetFrameworkVersion>
    <FileAlignment>512</FileAlignment>
    <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
@ -75,7 +75,6 @@
    <Compile Include="AesCrypt.cs" />
    <Compile Include="FanucProgram.cs" />
    <Compile Include="InputArgs.cs" />
-    <Compile Include="FANUCMachine.cs" />
    <Compile Include="fwlib32.cs" />
    <Compile Include="Program.cs" />
    <Compile Include="Properties\AssemblyInfo.cs" />
--- a/FanucProgramManager.sln
+++ b/FanucProgramManager.sln
@ -3,9 +3,9 @@ Microsoft Visual Studio Solution File, Format Version 12.00
 # Visual Studio Version 17
 VisualStudioVersion = 17.5.33414.496
 MinimumVisualStudioVersion = 10.0.40219.1
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "FanucProgramManager", "FanucProgramManager.csproj", "{1032188B-3321-42B2-87ED-343BF718CAF5}"
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "NcProgramManager", "NcProgramManager.csproj", "{1032188B-3321-42B2-87ED-343BF718CAF5}"
 EndProject
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "FanucProgramManager.Tests", "FanucProgramManager.Tests\FanucProgramManager.Tests.csproj", "{A1B2C3D4-E5F6-7890-ABCD-EF1234567890}"
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "NcProgramManager.Tests", "NcProgramManager.Tests\NcProgramManager.Tests.csproj", "{A1B2C3D4-E5F6-7890-ABCD-EF1234567890}"
 EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
--- a/Program.cs
+++ b/Program.cs
@ -4,10 +4,10 @@ using System.IO;
 using System.Management;
 using System.Security.Cryptography;
 using System.Text.RegularExpressions;
-using FanucProgramManager.Cnc;
-using FanucProgramManager.Cnc.Models;
+using NcProgramManager.Cnc;
+using NcProgramManager.Cnc.Models;

-namespace FanucProgramManager
+namespace NcProgramManager
 {
    internal class Program
    {
--- a/Properties/AssemblyInfo.cs
+++ b/Properties/AssemblyInfo.cs
@ -2,17 +2,17 @@
 using System.Runtime.CompilerServices;
 using System.Runtime.InteropServices;

-[assembly: InternalsVisibleTo("FanucProgramManager.Tests")]
+[assembly: InternalsVisibleTo("NcProgramManager.Tests")]
 [assembly: InternalsVisibleTo("DynamicProxyGenAssembly2")]

 // Le informazioni generali relative a un assembly sono controllate dal seguente 
 // set di attributi. Modificare i valori di questi attributi per modificare le informazioni
 // associate a un assembly.
-[assembly: AssemblyTitle("FanucProgramManager")]
+[assembly: AssemblyTitle("NcProgramManager")]
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("FanucProgramManager")]
+[assembly: AssemblyProduct("NcProgramManager")]
 [assembly: AssemblyCopyright("Copyright ©  2023")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]